Table of Contents
Advertisement
Removing the Split Bench Seat
Make
sure the seatback is in the upright position and
that the safety belts are
on
the correct section of the seat.
The head restraints should be fully down.
For the swmd
TOW
bench, with the seatback in the
upright position, unhook
the
side attachment for the
safety belt. This mini-buckle is located on the right side
of the seat.
the buckle with a small
pointed object like a key
1. Lift the seatback recliner lever or pull the nylon strap
on the back of the seat to fold the seatback forward.
2. Slide
the
seat all the way back by lifting either one of
the adjustment bars and sliding
the
seat fidly rearward.
I-
-
3.
From behind the bench seat, pull the nylon strap at
the base of the seat to release the rear latches
from
the floor pins.
the way forward.
4. Do not let
go
of
the straps until the seat is folded all
1-20
-
Advertisement
Table of Contents
