Table of Contents
Advertisement
Replacing the Split Bench Sections
Don't put the sections
of
the bench seat in so they face
rearward because they won't latch that way. If you want
more storage room behind the seat, adjust each section
by sliding it forward.
The split benches have seat position labels, located on
the back of each seat, showing where the seat
must go.
Follow that diagram.
The left (40) section of the 40/60 split bench uses the
A
and
B
sets of floor cups.
the C
and
D sets
of
floor cups.
and H sets
of
floor cups.
and J sets
of
floor cups,
The right (60) section of the 40/60 split bench uses
The left section of the
5
0
split bench uses the G
The right section of
the
50/50 split bench uses the I
See
"Seat Controls" in the beginning of this section for
more details. The seat must be placed in the proper
location for the legs to attach correctly.
Make sure the seat is in the fyll rear position before
beginning this procedure.
~
~~
~
__
~~
1. Squeeze the angled gray bar toward
the
solid gray
crossbar while placing the front hooks of the bench
seat onto
the front two floor pins.
1-22
Advertisement
Table of Contents
