Where Incoming Messages Are Delivered - Output Tray; G3/G4 Separate Tray; Tray Shift - Ricoh 3800C Operating Instructions Manual

Where Incoming Messages are Delivered - Output Tray

G3/G4 Separate Tray

The optional Extra G3 Interface Unit or optional
ISDN Unit, as well as an optional upper tray or
optional Finisher Unit is required.
You can specify the document feeding tray for
each line. For example, you can specify docu-
ments received through the G3 line to be fed to
the "Standard Tray" and documents received
through the G4 line to be fed to the "Upper Tray",
facilitating the separation of files.
Note
To use this feature, specify the line and desti-
nation in "G3/G4 Separate Tray".
"Reception Mode"
Operating InstructionsFacsimile Reference (option) <Advanced Features>
⇒ p.198

Tray Shift

The optional Finisher Unit is Required.
When the optional Finisher Unit is selected for
fax output, you can use the Tray Shift function to
have the internal delivery exit move to the left or
right whenever a fax or report is printed.
This is useful for separating faxes stacked in the
finisher output tray. For example, if the previous
incoming fax was output to the left, the next in-
coming fax will be output to the right and vice-
versa.
Note
You can turn this function on or off with the
User Parameters.
User Parameters" (Switch19, Bit0)
⇒ p.216 "Changing the
152