Ricoh 3800C Installation Manual

Mail Bin Type 3800C
For Machine Code: G060 / G080 / G082
INSTALLATION GUIDE
Important
Check the printer nameplate to confirm the model code.
If you want to use the optional paper feed unit at the same time, install the optional paper feed unit first, and then install the 4-bin mailbox.
You cannot install the 4-bin mailbox and 2 tray finisher at the same time.
The 4-bin mailbox weighs approximately 7kg (15.5lbs).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Check the contents of the box for the following items:
Description
Mailbox
Screws
Output Bin
Labels
Installation Guide(This sheet)
Be sure to check the following points:
•The power is turned off.
•The power cord is unplugged from the wall outlet.
•The interface cable is unplugged from the printer.
Remove the attached packaging.
Note
Do not remove the adhesive tape fastening the cable yet. Remove
it in step .
Caution
• Before installing options, the machine should be turned off and unplugged for at least thirty minutes.
Components inside the machine become very hot, and could result in a burn if touched.
• When lifting the machine, use the grips on both sides. The machine could break or cause injury if
dropped.
• It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric
(Code: G566)
shock.
• Before moving the machine, unplug the power cord from the outlet. If the cord is unplugged
abruptly, it could become damaged. Damaged plugs or cords can cause an electrical or fire
hazard.
• When moving the 4-bin mailbox, hold the center of both sides, and lift slowly. Lifting carelessly or
dropping it may cause injury.
• When installing the 4-bin mailbox, be sure to hold both sides. If you hold it by the bottom, you
might get your hand caught and injured.
Q'ty
1
2
4
1
1
ZDJP087J
Slowly open the front cover by pulling on the two areas
on the left and right.
Remove the green screwdriver, and then close the front
cover.
Use this screwdriver for all attachment and detachment of screws.
Note
After using the screwdriver, return it to its original position on
the inside of the front cover.
ZDJH007J
ZHXH171J
G566-8600B