Ricoh 3800C Operating Instructions Manual page 151

Operating InstructionsFacsimile Reference (option) <Advanced Features>
151
Note
Before you can use this feature, you need to
turn on Authorized Reception (Initial Setup
Reception Mode settings), program the Spec-
ified Senders (Key Operator Settings) along
⇒ p.198 "Reception
with the Paper. Mode",
⇒ p.223 "Special Senders to Treat Different-
ly"
The size of paper set in the bypass tray can
have a vertical length of a 148-457mm (58" -
180"), and have a horizontal length of 90-
305mm (35"- 120").
When you set paper sizes other than A4L,
1
B4L, A3L (8 / "×11"L, 11"×13"L) in the
2
bypass tray, specify the paper size. This size
should match the bypass paper size for copy-
ing or a paper jam may occur. To change the
bypass paper size for copying. ⇒ "Load Pa-
per in the Bypass Tray" in Maintenance Guide
Copier System Edition
If the specified paper size and the size of pa-
per set in the bypass tray do not match, paper
jams may occur or the image may be truncat-
ed.
If you use this feature, Image Rotation and
180 Degree Rotating Printing are not possi-
ble.