Ricoh 3800C Operating Instructions Manual page 249

Note
Inform the Requesting Party of the SUB Code
assigned to the Transfer Box. When they wish
to have a message transferred by your ma-
chine, ask them to send the message using
SUB Code Transmission and specifying this
S UB Code. If a pas sword is also pr o-
grammed, inform them of this too and ask
them to enter it for the SID Code.
You can store the following items:
• SUB (required)
Up to 20 characters long and can be composed
of digits 0-9, "#", "*" and spaces (the first
character cannot be a space).
• Box Name (required)
Up to 20 characters long
• Password (optional)
Up to 20 characters long and can be composed
of digits 0-9, "#", "*" and spaces (the first
character cannot be a space).
When registering a password, a mark is dis-
played before the Box Name.
• Receiving Station (required)
You can store 5 Receiving Stations (destina-
tions to which messages will be forwarded)
for each box. Specify Receiving Stations with
Quick Dials or Groups assigned to Quick Di-
als that have been programmed beforehand.
Operating InstructionsFacsimile Reference (option) <Advanced Features>
Limitation
After messages are transferred, a Transfer
Result Report is not sent back to the sender.
Note
After messages are transferred, they are de-
leted.
When this function is turned on, the machine
prints out received messages that it transfers
and the Transfer Result Report after the
transfer has finished. If you want to turn this
feature off, please contact your service repre-
sentative.
When the programmed receiver is a Multi-
step Transfer Group Dial, Multi-step Transfer
takes place.
You can edit boxes in the same way you pro-
gram them. However, to change the SUB
Code itself, you must delete the box, and then
program a new SUB Code.
You can edit boxes in the same way you pro-
gram them.
A A A A
Press the { { { { User Tools/Counter} } } } key.
249