Sid Code; Sep Code - Ricoh 3800C Operating Instructions Manual

L L L L
Press the { { { { Start} } } } key.
Note
If you use Immediate Transmission and
the destination fax machine does not sup-
port the SUB Code feature, a message will
appear on the display to inform you of this.
In this case, press [OK] to cancel the trans-
mission.

SID Code

There are times when you may wish to use a
"SID" (Sender ID) when sending confidential
faxes with the SUB Code feature.
Limitation
You can enter a SID using up to 20 digits.
Note
You can store IDs in Quick Dials, Groups and
Programs. ⇒ Chapter 3, "Quick Dial",
"Groups" in the Basic Features manual and,
⇒ p.153 "Registering and Changing Key-
stroke Programs"
Messages you send using this feature are
marked "SID" on all reports.
ports/Lists"
Operating InstructionsFacsimile Reference (option) <Advanced Features>
⇒ p.187 "Re-

SEP Code

Normally you can only use Polling Reception to
receive faxes from machines that have the Poll-
ing Reception feature of the same make. Howev-
er, if a machine of another make supports a
Polling Reception, you can receive fax messages
from the other party using this method instead.
Poll the other machine. You can receive messag-
es that have the same SEP Code as the SEP Code
you entered.
Limitation
You can only use this feature with a G3 line
(not with G4).
You cannot use Chain Dial with this
p.73 "Chain Dial"
78
feature.⇒