Rf Receiving Sensitivity - Quectel SC600Y-EM Series Hardware Design

NOTE
In GPRS 4 slots TX mode, the maximum output power is reduced by 3dB. This design conforms to the
GSM specification as described in Chapter 13.16 of 3GPP TS 51.010-1.

7.6. RF Receiving Sensitivity

The following table shows the conducted RF receiving sensitivity of SC600Y&SC600T modules.
Table 52: SC600Y-JP*/SC600T-JP* RF Receiving Sensitivity
Frequency
WCDMA B1
WCDMA B6
WCDMA B8
WCDMA B19
LTE-FDD B1 (10M)
LTE-FDD B3 (10M)
LTE-FDD B5 (10M)
LTE-FDD B8 (10M)
LTE-FDD B11 (10M)
LTE-FDD B18(10M)
LTE-FDD B19 (10M)
LTE-FDD B21(10M)
LTE-FDD B26 (10M)
LTE-FDD B28A (10M)
LTE-FDD B28B(10M)
LTE-TDD B41 (10M)
SC600Y&SC600T_Hardware_Design
Receive Sensitivity (Typ.)
Primary
-109.5 -111.5
-112 -109.5
-111.5 -111.5
-111.5 -109.5
-99 TBD
-98.4 TBD
-99 TBD
-98.7 TBD
-98.2 TBD
-99.2 TBD
-99.2 TBD
-97.7 TBD
-99 TBD
-96.7 TBD
-96.5 TBD
-96.8 TBD
SC600Y&SC600T Hardware Design
Diversity SIMO
TBD
TBD
TBD
TBD
-101.2
-101.2
-101.7
-101.2
-100.5
-102.2
-101.7
-100.7
-101.7
-100.6
-100.4
-99.7
Smart LTE Module Series
3GPP (SIMO)
-106.7dBm
-106.7dBm
-104.7dBm
-106.7dBm
-96.3dBm
-93.3dBm
-94.3dBm
-93.3dBm
-96.3dBm
-96.3dBm
-96.3dBm
-96.3dBm
-93.8dBm
-94.8dBm
-94.8dBm
-94.3dBm
114 / 128