Table of Contents
Advertisement
IC & FCC Requirement
FCC Certification Requirements.
According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a
mobile device.
And the following conditions must be met:
1. This Modular Approval is limited to OEM installation for mobile and fixed applications only. The
antenna
installation and operating configurations of this transmitter, including any applicable source-based
timeaveraging
duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements
of 2.1091.
2. The EUT is a mobile device; maintain at least a 20 cm separation between the EUT and the user's
body
and must not transmit simultaneously with any other antenna or transmitter.
3.A label with the following statements must be attached to the host end product: This device contains
FCC ID: XMR2019SC600NA
4.To comply with FCC regulations limiting both maximum RF output power and human exposure to RF
radiation, maximum antenna gain (including cable loss) must not exceed:
Operating Band
WCDMA BAND II
WCDMA BAND IV
WCDMA BAND V
LTE BAND 2
LTE BAND 4
LTE BAND 5
LTE BAND 7
LTE BAND 12
LTE BAND 13
LTE BAND 14
LTE BAND 17
LTE BAND 25
LTE BAND 26(814-824)
LTE BAND 26(824-849)
LTE BAND 41
LTE BAND 66
LTE BAND 71
Bluetooth/ Bluetooth BLE
SC600Y&SC600T Hardware Design
FCC Max Antenna Gain（dBi）
9
6
10.42
9
6
10.41
9
9.7
10.16
10.23
9.7
9
10.36
10.41
9
6
8.15
NA
Smart LTE Module Series
SC600Y&SC600T Hardware Desig
IC Max Antenna Gain（dBi）
8
5
8.26
8
5
8.25
8
7.76
8.09
8.13
7.79
8
NA
8.25
8
5
7.62
NA
n
1 / 1
Advertisement
Table of Contents
