Electric scissor lifts
E
- Driving
3.2 -
OPERATION FROM GROUND POSITION
Ground control box is an auxiliary to be used only in case of emergency.
3.2.1 - Machine start-up
3.2.2 - Machine shutdown
• Turn the key of the control box activation selector ( 72 ) to the center.
• Push in the emergency stop switch- push button (cut-off)( 114 ).
3.2.3 - Movement control
N.B.-:-Hold the ( 72 ) control box activation keyed selector switch to perform movements.
Ground control box controls (emergency station)
Control
Platform elevation/
lowering
Emergency
lowering /
Emergency
platform lowering
halted
N.B.-:-Releasing the ( 72 ) key or ( 106 ) selector stops movement.
3.2.4 - Other controls
• Switching from the ground control box to the platform control box :
The emergency stop cut-off switch- button ( 15 ) must be pulled out.
• Turn the key on the control box activation selector switch ( 72 ) to the left to energize the platform control
box. The ground control box controls are de-energized.
2420332270
1.
Pull the emergency stop button 144.
2.
Switch the machine on 72 or 92(Depending on the machine).
3.
Turn the key on the control box activation selector switch ( 72 ) to the right to energize
the ground control box.
e10 12
Push the platform elevation / lowering selector ( 106 ) upwards to raise
the platform.
Press the platform elevation / lowering selector ( 106 ) downwards to
lower the platform.
Pull the emergency handle ( 107 ) to lower the platform.
Release the emergency handle ( 107 ) to stop platform lowering.
Action
EN
A
B
C
D
E
F
G
H
I
73