Space For Operating Temperature Thermostat; Load Limiting In The Platform (If Fitted); Anti-Pothole Safety System - Haulotte Compact 8 Operator's Manual

Electric scissor lifts
D
- Operating principle
2.3 -

SPACE FOR OPERATING TEMPERATURE THERMOSTAT

For Russia and the Ukraine only :
Hydraulic energy to perform machine movements is provided by an electric motor driven
hydraulic pump.The operating speed of the pump is governed by a speed regulator. If the
temperature llimits are reached, an audible alarm alerts the operator. All movements are cut
off apart from travel to transport position.
Temperature limits :
• Electric machines : from 0° to + 40°
• Fuel-powered machines : from - 20° to + 40°
Location of operating temperature thermostat

2.4 - LOAD LIMITING IN THE PLATFORM (IF FITTED)

The overload limitation system activates if the heights defined in the
"Transport position maximum height" table are exceeded.
If the platform load exceeds the maximum authorized load, no movement is
possible from the platform control box.
The platform overload indicator and the buzzer warn the operator that the overload condition
exists.
To return the machine to normal operation remove some weight from the platform.
2.5 -

ANTI-POTHOLE SAFETY SYSTEM

For C8 (COMPACT 2032E) - C8W (COMPACT 2247E) - C10N (COMPACT 2632E) - C10
(COMPACT 2747E) - C12 (COMPACT 3347E) - C14 (COMPACT 3947E) - OPTIMUM 6
(OPTIMUM 1530E) - OPTIMUM 8 (OPTIMUM 1930E) :
A system of protection against the holes on road is spread automatically when the platform is
raised above values quoted in the table
position. If the pothole protection are not extended, micro-speed and platform elevation are
automatically cut. As soon as the platform is below values quoted in the table
speed and that control into large and low speed are engaged, the anti-tipping over devices
return automatically
The lifting height depends on the model of the machine. Refer to
2420332270 e10 12
Drive speed. Only micro-speed is possible in this
Drive speed.
Drive
61
EN
A
B
C
D
E
F
G
H
I