Electric scissor lifts
F
- Special procedure
2.2 -
AUTOMATIC BRAKE RELEASE (OPTION)
To tow a broken down machine, the brakes on the drive wheels can be released using a
remote control allowing brake release to be activated remotely.
Perform these operations on flat, horizontal ground. Failing that, block the wheels to immobilize the
machine. During an operation of disengaging the drive hubs, the machine is in free wheels, the brake
system no longer functions.
1.
Activate brake release using the push button control
(lower console). The motor pump unit is powered for a
brief moment. Brake release is effective after
approximately 1 s.
2.
As long as the button is activated, the brakes on the
machine are released (solenoid valves YV10 and
YV11 are supplied).
3.
Tow the machine in slow speed.
4.
The brakes are reactivated 0,5 s after the push button
is released.
In the towing configuration, the machine is no longer slowed down. Use a drawbar to avoid any risk of
accident.
Do not exceed 5 km/h (3,10 mph) .
2420332270
e10 12
81
EN
A
B
C
D
E
F
G
H
I