Towing; Manual Brake Release - Haulotte Compact 8 Operator's Manual

Electric scissor lifts
F
- Special procedure

2 - Towing

In case of a machine failure, it is possible to tow it to load it onto a trailer.
2.1 -

MANUAL BRAKE RELEASE

To tow a broken-down machine, perform manual brake release.
Perform these operations on flat, horizontal ground. Failing that, block the wheels to immobilize the
machine. During an operation of disengaging the drive hubs, the machine is in free wheels, the brake
system no longer functions.
For : C8 (COMPACT 2032E) - C8W (COMPACT 2247E) - C10N (COMPACT 2632E) - C10
(COMPACT 2747E) - C12 (COMPACT 3347E) - C14 (COMPACT 3947E) - OPTIMUM 6
(OPTIMUM 1530E) - OPTIMUM 8 (OPTIMUM 1930E)
1. Close the tap ( NV1 ).
2. Open the tap ( NV2 ).
3. Push the pump by hand ( HP1 ) until the brake is fully
released.
4. Slow towing.
After towing the machine :
5. Close the tap ( NV2 )
6. Open the tap ( NV1 ).
For : COMPACT 10RTE (COMPACT 2668RTE) -COMPACT 12RTE (COMPACT 3368RTE)
7. Close the tap ( N1 ).
8. Open the tap ( N2 ).
9. Push the pump by hand ( MK4 ) until the brake is fully
released.
10. Slow towing.
After towing the machine :
11. Close the tap ( N2 )
12. Open the tap ( N1 ).
In the towing configuration, the machine is no longer slowed down. Use a drawbar to avoid any risk of
accident.
Do not exceed 5 km/h (3,10 mph) .
80 2420332270 e10 12
NV2
NV1
MK4
N2 N1 MK4
EN