4.5.
OPERATING INSTRUCTIONS.
IMPORTANT: Machine must only be operated when
all checks have been completed.
After use, always set cut-out (item 1, photo 7) to OFF.
4.5.1. Operation from ground.
Starting the engine
• Check that the battery cut-out is in working position. (photo 7, item 1)
• Check that emergency stop button on ground control panel (item 9, photo 1) is unlocked. If necessary
work it using the ignition key.
• Check that emergency stop button on platform control panel (item 9, photo 2) is unlocked. . If necessary
work it using the ignition key.
• The three lights (photo 1, items 1-2-3) should come on.
• Press start button (photo 1, item 8). Once the engine is running, release button. the three lights should go
out.
NOTE:
• If the engine does not start, cut the contact and repeat the operation. Check that the two emergency stop
buttons are unlocked.
• Never actuate the start button for more than 10-15 seconds.
• Press the emergency stop button to turn the engine off, and disables the platform controls. To use these
controls again, unlock the button.
• During platform use, use the platform controls to start and stop the engine.
4.5.2. Operation from platform.
First, check that:
• battery cut-out is in working position. (photo 7, item 1)
• the 4 cylinders are fully extended or retracted (stabilistation option only).
• platform load respects the maximum load allowance and is well distributed.
Do not use ignition aid products.
Let the engine run for several minutes before loading the platform.
2
Photo 7 : Engine start battery.
NOTICE
29
1