Pre-Operation Instructions; General Instructions; Specific Instructions - Haulotte Compact 8 Operator's Manual

Electric scissor lifts
A
- Safety precautions

2 - Pre-operation instructions

2.1 -

GENERAL INSTRUCTIONS

• The employer has the obligation to issue a driving permit to the operator.
• The employer is obliged to inform the operator of the local regulations.
Do not operate the product in the following situations :
• On soft, unstable or cluttered ground.
• With wind blowing faster than the permissible limit. Check the maximum value in the technical
characteristics (
( Section A 3.2.4-Risk of uncontrolled movement and overturning).
• Close to power lines. Respect the safety distance (
• At ambient temperatures higher than 45 °C(113 °F)
Consult HAULOTTE® if it is necessary to work outside this range.
• In an explosive atmosphere.
• During storms (risk of lightning).
• In the presence of strong electromagnetic fields (radar, etc ...).
N.B.-:-You are advised to use the machine under "NORMAL" climatic conditions.. If you need to use
the machine in climatic conditions likely to cause deterioration (humidity, temperatures outside the
recommended ranges, salinity, corrosiveness, atmospheric pressure), contact HAULOTTE Services®.
Reduce intervals between servicing.
N.B.-:-Whilst the machine is not in use, care must be taken to ensure that if the machine is not locked
in a secure location, that the unit key switch is removed to prevent unauthorised use of the machine.
2.2 -

SPECIFIC INSTRUCTIONS

Do not operate the product in the following situations :
• If the load in the platform exceeds the maximum load authorized. Check the maximum value in the
technical characteristics (
• If the ground slope is greater than the permissible limit. Check the maximum value in the technical
characteristics (
• At night unless the machine is equipped with the optional light.
• If the number of persons exceeds the permissible limit. Check the maximum value in the technical
characteristics (
• If the side force is greater than the permissible force. Check the maximum value in the technical
characteristics (
2420332270
Section G 1-Main characteristics). Consult the Beaufort scale
Section G 1-Main characteristics).
Section G 1-Main characteristics).
Section G 1-Main characteristics)
Section G 1-Main characteristics)
e10 12
Section A 3.2.3-Risk of electrocution).
and lower than -15 °C(5 °F) .
EN
A
B
C
D
E
F
G
H
I
13