Visual And Sound Alarms - Haulotte Compact 8 Operator's Manual

Electric scissor lifts
E
- Driving
For OPTIMUM 6 (OPTIMUM 1530E) and OPTIMUM 8 (OPTIMUM 1930E) only :
The knob ( 1 ) located on the tilt label is used for the autotest.
The autotest mode simulates a slope exceeding the authorized angle. An internal control is
carried out.
• Push on the knob ( 1 ) (less de 1 s) to launch the autotest.
• The 2 LED flicker during the test. The total duration of the test is 5 s.
Messages delivered by the tilt detector
Lit green LED
Blinkling green LED
LED red lit
Green LED and reds lit
Green LED and red twinkling
N.B.-:-Once the test carried out, return under normal operation.

3.1.3 - Visual and sound alarms

2420332270
indicator Status
1. Pull the emergency stop switch- buttons (cut-off) (144, 46).
2. Switch the machine on (72) or (92)(Depending on the machine). All of the ground control
box indicators light up and a sound signal (beep) is emitted.
e10 12
Description
Machine in authorized angular position
Machine exceeding the angular limit within the authorized
time
Machine exceeding the authorized angular limit
Fault detector
Detector in autotest
71
EN
A
B
C
D
E
F
G
H
I