Drive Speed - Haulotte Compact 8 Operator's Manual

Electric scissor lifts
D
- Operating principle

2.2 - DRIVE SPEED

All driving speeds are authorised when the machine is folded, (machine in
transport position).
The maximum travelling speeds are reduced when the following lifting
height is reached :
OPTIMUM 6 (OPTIMUM 1530E)
OPTIMUM 8 (OPTIMUM 1930E)
COMPACT 8 (COMPACT 2032E)
COMPACT 8W (COMPACT 2247E)
COMPACT 10N (COMPACT 2632E)
COMPACT 10 (COMPACT 2747E)
COMPACT 12 (COMPACT 3747E)
COMPACT 14 (COMPACT 3947E)
COMPACT 10/12RTE (COMPACT 2668/3368RTE)
For C8 (COMPACT 2032E) - C8W (COMPACT 2247E) - C10N (COMPACT2632E) - C10
(COMPACT 2747E) - C12 (COMPACT 3347E) - C14 (COMPACT 3947E) - OPTIMUM 6
(OPTIMUM 1530E) - OPTIMUM 8 (OPTIMUM1930E) :
When not in the above-described transport position, the low speed is engaged automatically.
For COMPACT 10RTE (COMPACT 2668RTE) - COMPACT 12RTE (COMPACT 3368RTE) :
When not in the above-described transport position, the micro speed is engaged automatically.
Driving is cut off if the tilt exceeds the authorized limit.
The electronic variable speed unit controls movement and driving speed.
It receives information from the control joystick concerning the movements to be performed.
It also manages the safety systems status.
Poor knowledge of the characteristics and operation of the machine can lead the operator to
think that a normal safety operation is a malfunction.
60 2420332270
Machine
Transport configuration limit height
Mètre
1,50
1,60
1,60
1,75
1,55
1,80
1,85
2,45
2,70
e10 12
Feet
4 ft 11 in
5 ft 3 in
5 ft 3 in
5 ft 9 in
5 ft 1 in
5 ft 11 in
6 ft 1 in
8 ft 0 in
8 ft 10 in
EN