Driving; Recommendations; Checks Before Use; Visual Inspections - Haulotte Compact 8 Operator's Manual

Electric scissor lifts
E

- Driving

Driving

1 - Recommendations

The manager of the company responsible for the commissioning of the machine must ensure that the
machine is fit for the work it is to perform. i.e. that the machine is suitable to carry out the work in
complete safety in compliance with this Operator Manual. All managers who are responsible for
persons operating the machine, must be familiar with the regulations currently applicable in the country
of use and ensure that they are adhered to.
Before using the machine, read the previous chapters in this manual. Ensure that you have understood
the following points :
• Safety precautions.
• Operator's responsibilities.
• Presentation and the operating principle of the machine.
N.B.-:-The machine reaches optimum performance (speed of movement, load capacity) when the
temperature of the oil in the hydraulic circuit is greater than 10°C. After a prolonged period of disuse at
a lower temperature, lifting and lowering the platform several times without any load and performing a
few translation movements is enough to restore the machine's nominal performances.

2 - Checks before use

Each day and before the beginning of a new work period and on each change of operator, the machine
must be subjected to a visual inspection and a complete functional test.
Any repairs required must be performed before the machine is used, its correct operation depends on it.
Find all the function indicators and controls in
2.1 -

VISUAL INSPECTIONS

2.1.1 - General mechanical functions

For all the following checks, ensure that the machine is switched off.
Check the following points :
• The presence of the identification plate, labels and operator manual :
• Their state of cleanliness and visibility.
• Clean or replace if necessary.
2420332270 e10 12
Section C 5 - Control boxes
65
EN
A
B
C
D
E
F
G
H
I