Commissioning & Welding; Welding Principle - VETRON 5374 Service Manual

03. COMMISSIONING & WELDING
Via hot air the glue on the tape is heated. The material and tape is
combined through the feeding wheels.
ADVICE:
01. Welding tape must be coordinated with the material. Welding
tempature, airflow, gap size and feeding speed have to be
coordinated to have a optimal welding result.
02. The material to be welded and the ambient temperature are
decisive for all welding equipment settings. For this reason,
optimum settings can be determined using weld tests only.

01. WELDING PRINCIPLE

02/2021
Vetron 5374 HotAir-Welding
19