Troubleshooting - Hisense HME8C55E User Manual

Troubleshooting

Before repair, check the following table for possible fault causes.
If the fault persists after you follow the instructions in the User Guide, you can consider repair.
Fault Symptom
The power indicator does not
light on.
The power indicator lights on
in orange.
The image is blurred or has
interference stripes or obvious
color edges on characters.
The image is abnormal.
The screen has blurs (color
irregular pinstripes) wholly or
partially.
The image is not displayed on
the full screen, with blurs on
the edges.
Troubleshooting
Solution

Check whether the power plug is securely connected to the
socket.

Unplug and plug the power connector and restart the monitor.

Check whether the power button is switched to the I side.

Check whether the signal cable is securely connected.

Check whether the output resolution of the connected signal
source is the optimal resolution required by this product.

Press and hold the
button to select the interface of the connected signal source.

Restart your personal computer or the connected signal source
equipment.

Check whether wiring is secure.

It is recommended that the connection cables delivered with the
LCD monitor be used.

Restart the PC or the connected signal source device.

Check whether the output resolution of the current signal source
is appropriate.

Restart the PC or the connected signal source device.

This problem occurs when the signal source output format does
not match with this product. Please check the signal output
format.

Restart the PC or the connected signal source device.

A similar phenomenon occurs when the signal source output
format does not match that of the monitor. Please check the
signal output format.
26
button and press the INPUT1 or INPUT2