Hisense HME8C55E User Manual page 29

Operational Instructions and Function Adjustment

SDI(4K) Setting
This parameter is used to set the signal source format in the SDI(4K) channel.
Adjustment options: Square Division and 2 Sample Interleave.

HDMI Output Resolution
This menu is used to adjust the resolution type for HDMI output.
Adjustment options: 1920x1080P 60Hz and 3840x2160P 60Hz

Logo Set
It is used to set whether to display the Hisense LOGO upon power-on. Options are Enable and Disable.
Note

The default value is Enable.

Power Saving
It is used to set whether to enable or disable the power saving function. Options are Enable and
Disable.
Note

Disable: When the monitor detects that the input port has no signal input, it keeps the backlight on.

Enable: When no signal input is detected through an input interface, the monitor automatically
enters the power saving mode.

The power saving function is disabled initially. Before the monitor enters the power saving mode,
the system prompts "Preparing to enter the power saving mode...".
System Settings
SDI(4K) Setting
HDMI Output Resolution
Logo Set
Power Saving
Monitor Info
Mode Rename
Factory Reset
Return
OK
Windows
24
Enable
Enable
Select