Troubleshooting - Hisense HMD5G21S User Manual

Troubleshooting

Before repair, check the following table to see if you can identify the cause of the fault.
If the fault persists after you follow the instructions in the User Guide, you can consider repair.
Fault Symptom
The power indicator does
not light on.
The power indicator lights
on in orange.
The image is blurred, the
screen displays
interference stripes,
characters show prominent
edge colors.
The image is abnormal.
The entire or part of the
screen shows
(colored irregular
stripes).
The image cannot
displayed in full screen
mode, and the screen edge
shows blurs.
The monitor connected by
the USB cable is not
detected.
Troubleshooting
Solution

Check whether the power plug is securely connected to the socket.

Check whether the power adapter supplies power properly.

Ensure that the power adapter parameters meet the requirements of
the LCD monitor.

Check whether Power is set to Off in the menu.

Check whether the signal cable is securely connected.

Check whether the graphics card output resolution of the PC meets
the optimal resolution required by the LCD monitor.

Disconnect and then reconnect the signal cable, or restart the PC.

Check whether wiring is secure.

It is recommended that the connection cables delivered with the LCD
or
monitor be used.

Restart the PC.

Check whether the output resolution of the graphics card is proper.

Tap All Reset to restore all display parameters of the image to the
default settings.

This is due to mismatch between the PC's graphics card output format
blurs
and that of the LCD monitor. Check the signal output format. Restart
thin
the PC.
be

This is due to mismatch between the PC's graphics card output format
and that of the LCD monitor. Check the signal output format.

Check whether the USB cable is properly connected. For details, see
the "USB Connection" section. Use another USB port. Ensure that
the PC and external equipment work properly.

Restart the PC.

Check whether the PC and operating system are compatible with
USB. (To check the USB compatibility of each device, consult the
manufacturer.)

When the Windows operating system is used, check USB settings in
the PC's BIOS settings.
21