Safety Information - Hisense HME8C55E User Manual


According to the test result, this equipment complies with the following standards:
GB4943.1-2011 Information technology equipment - Safety, GB9254-2008 Information
technology equipment - Radio disturbance characteristics - Limits and methods of measurement,
GB17625.1-2012 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic
current emissions (equipment input current ≤ 16 A per phase), EMC: IEC/EN 60601-1-2:2014,
and EN 55011/CISPR 11 Class B.

When the LCD monitor is used with a medical imaging system, ensure that the equipment
connected to the LCD monitor's signal I/O complies with medical equipment standards. All
external connections with other peripheral equipments must comply with the requirements of
Article 16 in IEC 60601-1 of edition 3.1, or the medical electrical system requirements of Table
BBB.201 in IEC 60601-1-1.

The electromagnetic waves emitted by power supply equipment may affect the use of the LCD
monitor and damage it. Install the LCD monitor in an environment free of electromagnetic wave
interference.

If the LCD monitor generates interference or reacts to interference, take one or more of the
following measures:

Adjust the position or direction of the affected equipment.

Increase the distance between the LCD monitor and the affected equipment.

Consult Hisense.

Please use the power line provided by our company and ground it correctly.

Do not modify or retrofit the LCD monitor by yourself. Failure to comply with cause interference
and damage to the LCD monitor.

Equipment classification

Anti-lightning class: Class I

operating mode: continuous

Protection level: IP65 for the front surface, and IP22 for other surfaces

Medical equipment class: (MDR 2017/745): Class I

EMC level (IEC 60601-1-2): Group I Class B

Safety Information

28