Table of Contents
Advertisement
Operational Instructions and Function Adjustment
Power-on/off
Power-on: Move the IO power switch to I. Then, the power is turned on and the monitor is powered on.
Power-off: Move the IO power switch to O. Then, the power is turned off and the monitor is powered
off.
Note
If you do not need to use the monitor for a long time, turn off the power and disconnect the monitor
from the power socket.
Power Indicator Status
If the green power indicator is on, the power is turned on and the monitor works normally.
When the monitor indicator color is orange, the power switch is turned on, and the equipment is in the
power saving state.
If the power indicator is off, the power is turned off and the monitor is shut down.
Button Locking/Unlocking
To avoid misoperation, buttons can be locked and unlocked. Before using a button, you must unlock
the button first.
Unlock buttons: When a button is locked, press and hold the
unlocked and available, with the light color changed to white.
Lock buttons: When a button is unlocked, press and hold the
locked and unavailable, with the light off.
Timeout locking: When a button is unlocked and is not operated in 120s, the system automatically
locks the button and the button indicator is off.
Shortcut Menu Operation
Mode Selection
The following modes are available in the power-on state:
Option
Factory
DICOM
Hybrid GAMMA
Definition
The optimal display mode preset in the factory
Compliant with DICOM Part 14
Compliant with Gamma and DICOM, with support for custom parameter
settings.
LOCK button for 3s. The button is
LOCK button for 3s. The button is
15
Advertisement
Table of Contents
