Mounting Instructions - U-Line H-1131 Instructions Manual

NOTE: Recommended mounting height is 45"
from the floor to bottom of dispenser.
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition as
enclosed hardware may not be compatible
with your wall surface.
1. Insert the key all the way into the lock opening on
the bottom of dispenser and rotate clockwise until
the cover pops open. (See Figure 4)
2. Open dispenser cover and hold dispenser to ideal
mounting place on wall. (See Figure 5)
3. Mark the holes on the wall where screws will be
inserted. (See Figure 6)
4. Drill into wall at five marked locations with 1/4" drill
bit. (See Figure 7)
5. Hold dispenser to wall so holes in dispenser match
up with previously drilled holes in wall. Insert wall
anchors and screws. (See Figure 6)
PAGE 2 OF 9

MOUNTING INSTRUCTIONS

Figure 4
Figure 5
Figure 6
Recommended
Mounting
Locations
Figure 7
0721 IH-1131