Mounting Instructions - U-Line TORK H-9344 Manual

NOTE: Recommended mounting height is 28"
from floor to base of mounting template.
(See Figure 5)
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition, as
enclosed hardware may not be compatible
with wall surface.
1. Tape mounting template to wall at desired height
and ensure that template is level. (See Figure 5)
Figure 5
2. Using a 6 mm drill bit, drill into wall at each marked
screw location on template. (See Figure 6)
Figure 6
PAGE 2 OF 9

MOUNTING INSTRUCTIONS

3. Remove template from wall. Insert wall anchors
28"
(if necessary) into four previously drilled holes. Hold
dispenser up to wall so holes in wall and dispenser
match up. Insert screws and tighten with screwdriver.
(See Figure 7)
Figure 7
0221 IH-9344