Unloading The Device; Moving The Device Without Drive; Disconnecting The Drive; Pushing - AS MOTOR AS 940 Sherpa 4WD RC Operator's Manual

Unloading the device

1. Slacken the transport attachments.
2. Carefully drive the device over the ramps off the loading
area.

Moving the device without drive

Warning
The device can roll away without the drive.
► Never unlock the drive in steep terrain without securing
the device against rolling away.

Disconnecting the drive

Notice
When the engine is started while the drive is unlocked, the
hydraulic drive can be destroyed.
► Never start the engine when the drive is unlocked.
2
1: = Locked
2: = Unlocked

Pushing

Caution
Hot muffler grid.
► Do not touch the muffler grid (3) when pushing the de-
vice. It becomes very hot during operation and you can
get burned.
To push the device without engine drive, unlock the drive at
the rear of the device and release the parking brake. The de-
vice can only be braked via the parking brake.
3
1
Moving the device without drive

Towing

If the engine cannot be started again, the device must be
towed.
1. While using the brakes, let the device roll to terrain that is
less steep.
2. Secure the device against rolling or sliding.
3. Secure the device with a cable winch that has enough
load capacity.
4. For towing, unlock the drive and release the parking
brake.
37