AS MOTOR AS 940 Sherpa 4WD RC Operator's Manual page 9

I G00014799
Risk of injury due to rotating parts.
Keep your hands away from rotating parts.
J G00014798
Burn hazard from hot surfaces.
Do not touch the engine or the muffler. They get very hot dur-
ing operation.
K G00014805
Fig. 4:
Fire and explosion hazard.
Press the start-stop switch on the Remote Control Transmit-
ter and remove it before refueling. Then switch off the main
switch.
Keep fuel away from ignition sources and do not smoke dur-
ing handling.
N G00014843
Risk of tipping.
While in ride-on operation (MC), do not use the device on
slopes.
Description of the safety signs on the device
O G00014842
Risk of tipping.
In remote control mode (RC), do not pause below the device
on slopes.
L G00014804
Fig. 5:
Warning sign of the engine manufacturer on the engine. Ob-
serve the information in the operator's manual of the engine
manufacturer.
Q G00014783
Clean ventilation grid!
The cooling air of the engine is sucked in through the ventila-
tion grid of the engine cover. Always keep the entire surface
free and open.
R G00014853
BEI SCHWEISSARBEITEN ABSTECKEN
DISCONNECT BEFORE WELDING
AVANT SOUDAGE, DÉCONNECTER LE RÉCEPTEUR
ANTES DE SOLDAR, DESCONECTAR
Fig. 6:
When carrying out welding work, disconnect the receiver!
When carrying out welding work, disconnect the receiver of
the remote control.
G00014853
9