Related Manuals for AS MOTOR Allmaher AS 28 2T ES
Summary of Contents for AS MOTOR Allmaher AS 28 2T ES
- Page 1 Operator's Manual Allmäher® AS 28 2T ES From serial number: 035019010001 Issued: 28 Jan 2019, V2.0 en-Translation of the Original Operator's Manual...
-
Page 2: Notes On The Operating Manual
dummy Intended use Notes on the operating manual The device is intended only for cutting grass or similar vegetation in well-maintained grounds Dear customer, in agriculture, forestry and preservation of the countryside that are cut at least once a year. Congratulations on your purchase. -
Page 3: Table Of Contents
Contents General inspection........22 Notes on the operating manual..... Grease lubrication........22 Contact ............ Maintaining the engine......22 Device data..........Checking the spark plugs......23 Maintaining the air filter......23 Intended use..........Checking rear brake........ 24 Explanation of the symbols....Checking the drive........ -
Page 4: Explanation Of The Symbols
dummy Inhaltsverzeichnis Explanation of the symbols Notice Danger of property damage Symbols in the instructions Indicates a possible risk of damage of the device and its surroundings. In these operating instructions, the following symbols are used to denote special dangers. Signs on the device Warning. - Page 5 Type plate Clean the ventilation grid! The cooling air of the mo- The type plate on the device provides you tor is sucked in through with information on the device type and the the ventilation grid of the technical data. engine cover.
-
Page 6: Safety Instructions
Safe handling of fuel Safety instructions Fuel is toxic and highly flammable. There is a Get informed! burn and explosion hazard! Keep fuel away from ignition sources and do For your safety, read these operating instruc- not smoke during handling. tions carefully. -
Page 7: Check The Device Prior To Use
Check the device prior to use Danger area Prior to each use, check the blade, protection skirt, covers, drive and fastening parts, cables and cable connections for proper working con- dition and firm seating by visual inspection. Never use the device with defective or missing covers or protection skirt or rollbar. -
Page 8: Use Caution During Operation
Use caution during operation Prior to mowing Danger of injury during motor start Personal protective measures Do not start the engine During mowing, always wear – if fuel was spilled. safety shoes with good grip and long trousers. Do not mow with –... -
Page 9: Driving On Slopes
Driving on slopes Fig. 2: Avoid mowing damp grass, there is a sliding risk! Fig. 3: Risk of injury during mowing on slopes due to Be extremely cautious when turning the device tipping over or sliding. round or pulling it toward you and when mov- –... -
Page 10: When Work Is Completed
When work is completed Use caution during maintenance and repair After mowing, always close the fuel valve and the tank ventilation. Only carry out work as described in these op- erating instructions. Have an authorised ser- Prior to leaving the device, wait until the engine vice centre perform all other work. -
Page 11: Device Description
Device description 1 Steerable front wheel 2 Interlock steerable front wheel 3 Cutting height adjustment 4 Choke 5 Air filter 6 Starter grip 7 Lever for lateral adjustment of handlebar 8 Tie rod height of bar 9 Tank ventilation 10 Tank filler spout 11 Fuel valve 12 Spark plug connector 13 Type plate... -
Page 12: Control Elements
Lever for lateral adjustment of handlebar (4) Control elements 1. Release the eccentric tension lever. 2. Attention: Do not crush the Bowden cables when pivoting the handlebar. Swivel the handlebar to the side to the de- sired position. 3. Clamp the handlebar with the eccentric ten- sion lever. -
Page 13: Information On Mowing
Carburetor with choke (4) and tickler Information on mowing For cold start of the engine, you require the Prior to mowing, check your device for com- choke (1) and the tickler (2). pleteness, proper functioning, and cleanliness. Open the choke: A dirty ventilation grid causes overheating of Turn clockwise as far as it the engine, this can damage the engine. -
Page 14: Prior To Starting
Notice: You can find on the market ready Prior to starting mixed two-stroke fuels. Based on our experi- ence, the ready mixed fuels “STIHL Motomix Fuel 1:50”, “ASPEN 2-stroke” and “Oest Oecomix” can be used. No guarantee can be given for The engine must be run on a mixture of petrol operation of the device with other fuels and and two-stroke oil. -
Page 15: Adjusting Cutting Height
Adjusting cutting height Cutting height at steerable front wheel Adjust the cutting height setting only when the engine is switched off. Set the cutting height so that the blade does not touch the ground even in case of terrain unevenness. If the cutting height is set too high, objects can be ejected and the “clean cut appearance”... -
Page 16: Locking Steerable Front Wheel
Locking steerable front wheel Starting On flat terrain, it is more comfortable to leave Warning the front wheel free to pivot. If you mow in hori- zontal direction, it is necessary to always lock During startup, there is a risk of injury the wheel. -
Page 17: Driving
12. Reopen the choke (turn clockwise). Turning 13. For mowing, set the accelerator lever to the Turn the device round only where the grass maximum speed. has been mowed already. Driving Turning round on an even surface: 1. Switch off the drive. 2. -
Page 18: Transport
Secure the device against rolling, sliding Transport and tilting. Use straps that support the weight of the device. Warning Risk of injury due to the heavy weight of the device. The device can fall over and fall down and cause severe injuries. ►... -
Page 19: Maintenance
Maintenance Caution Risk of injury. Warning Guide bar can snap back. Risk of injury due to unexpected movement. ► To provide secure stand, place the guide When inspections are carried out, the bar onto the ground. device can move unexpectedly. Let the device cool down for at least 20 ►... -
Page 20: Maintenance Overview
Maintenance overview Improper maintenance can make the device unsafe for operation and result in accidents. Regular maintenance keeps you device ready for use. Service the device according to the following maintenance instructions. Contact an authorised service centre if problems during maintenance occur or if you determine de- ficiencies during one of the following inspections. - Page 21 Label Condition of the labels. ■ ▲ Rear wheel brake Check. ■ ▲ Parking brake Check. ■ ▲ Flammable material Remove easily flammable debris buildup from the engine ■ ▲ and the device. Tyres Check tyres and, if necessary, the tyre pressure. ■...
-
Page 22: Cleaning The Device
Cleaning the device Grease lubrication Depending on use, clean the device thor- oughly, especially the bottom and the blade. Grass cuttings and dirt that are stuck interfere with the grass ejection and impair the cutting quality. To sufficiently cool the engine, keep the engine cover, ventilation grid and engine clean. -
Page 23: Checking The Spark Plugs
Checking the spark plugs Maintaining the air filter Danger Warning The ignition system generates an electro- Cleaning agents pose a fire and explosion magnetic field. hazard. ► Wearers of pacemakers must not work ► Never clean the air filter with flammable on live parts. -
Page 24: Checking Rear Brake
Checking rear brake Checking the drive 1. Put the device on a non-slip surface (e.g. Warning concrete or asphalt). If the brakes are incorrectly adjusted, the 2. Switch off the engine. device can roll away. 3. Actuate the drive. ► Make sure that the brake is always func- 4. -
Page 25: Checking The Blade
Checking the blade Unusual vibrations are an indication that – blades are missing or broken, Warning – the blade is worn excessively or on one side Wear or damage at the blades and the fastening elements can result in the blades –... -
Page 26: Assembly
Assembly Scope of delivery The device is shipped in a carton. The scope of delivery included: – The device. – This operating manual. – Manufacturer’s certificate. – Protection bow. – Protection skirt. – Front wheel. – Side plate. Fig. 10: 1. Swing the guide bar (1) back. –... -
Page 27: Protection Skirt And Steerable Front Wheel
Protection skirt and steerable front wheel 6. Apply the protection bow (3) on the right blade hood side to the screw M8 (4). 7. Screw in the protection bow at the front hole (5) of the side panel with a screw M6, washer and nut. Make sure that the rear hole of the protection bow coincides with the rear hole of the side panel (11). -
Page 28: Fastening The Air Filter
12. Screw down the protection bow and the Storage protection skirt at the right side of the blade hood (10) with a washer and a retaining Storing the device nut. 13. Insert the rear screw M6 at the side Keep the device in a closed, dry, and well vent- panel (11) and screw down the protection ilated room and out of reach of children. -
Page 29: Spare Parts
Spare parts Disposal The reliable and safe operation of the device The device cuts and shreds the plant material also depends on the quality of the spare parts in a single operation. Shredded plant material used. Only use original spare parts and ac- decomposes quickly, can be utilized as fertil- cessories that were approved by izer, and, therefore, be left on the ground. -
Page 30: Troubleshooting
Troubleshooting The following table contains the most frequent problems and their elimination. If more problems occur, contact the closest authorised service centre. You can find an authorised service centre on our home page www.as-motor.de. Problem Possible cause Remedy Engine does not start Engine brake lever is not Press the engine brake lever towards pressed. - Page 31 Engine starts badly or Choke is closed. Open the choke. runs irregularly Air filter is dirty. Maintain air filter (see Maintenance). Poor quality, dirty, or old fuel. Always use fresh fuel. Spark plug is dirty, damaged, or Clean spark plug and check electrode incorrect electrode gap.
- Page 32 Mulching result with Plant material is ejected too Increase speed. low plant material not quickly. satisfactory Discharge channel is Mowed grass was too long or Adjust cutting height and mowing speed jammed too damp. to the mowing conditions. Blade is worn. Authorised service centre.
-
Page 33: Fuel Ratios Of Fuel 2-Stroke Devices
Fuel ratios of fuel 2-stroke devices Fuel Fully synthetic two-stroke oil Only with Titan 2T 100S (octane rating ROZ 91 min.) 1:50 1:100 litres Litre (=ml/cm Litre (=ml/cm 0.02 (20) 0.01 (10) 0.04 (40) 0.02 (20) 0.06 (60) 0.03 (30) 0.08 (80) 0.04 (40) 0.1 (100) -
Page 34: Technical Data
Technical data Type AS 28 2T ES Range of application (temperature) 0 – 30 °C Engine, type One cylinder two stroke engine Manufacturer AS-Motor Germany Type AS 165 ES Cylinder capacity 165 cm Performance 4,0 kW (5,4 PS) Engine speed 3800 min Spark plug NGK BR6 HS Torque 25 Nm Electrode gap for optimal starting behaviour... -
Page 35: Accessories
Accessories Abrasive ground blade: G06323003 Hand protection: G06380070 Spray paint 400 ml, colour orange: G00011050 Operating hours counter: G06927008 Clinometer: G06950027 Hand protection set: G06780309 Flat tyre protection 950 ml: G00041068... -
Page 36: Declaration Of Conformity
Declaration of conformity AS-Motor Germany GmbH & Co. KG Ellwanger Straße 15 D-74424 Bühlertann www.as-motor.de Declaration of conformity We declare that the grassland mower of type AS 28 2T ES and the serial number starting from 035019010001 as brought into circulation by us conforms to all relevant 2006/42/EC safety and health requirements of the EC directives lis- 2014/30/EU... - Page 40 AS-Motor Germany GmbH & Co. KG Ellwanger Straße 15 D-74424 Bühlertann www.as-motor.de THE HIGH GRASS MOWER AND 2 STROKE ENGINE MANUFACTURE AS-Motor is your premium manufacturer for lawn and high grass mowers as well as 2 stroke en- gines. We offer our customers professional technology for steep slopes, rough terrain, and lawn care.