Yearly Or Every 50 H By The Authorized Service Center - AS MOTOR AS 940 Sherpa 4WD RC Operator's Manual

Release the drive lever Does the device stop when the lever is in neutral posi-
tion (parking brake)?
Does the lever in MC mode move to neutral position
when the brake pedal is activated?
Does the drive lever in the MC mode move to neutral
position when the driver leaves the seat?
Bowden cables Check for proper function and ease of movement.
Acceleration lever Check for proper function.
Chassis and protective Check for rust and fissures and check the welding
devices seams.
Are all protective devices and covers in place, fastened
correctly and properly functioning?
Label Check for proper condition and completeness.
Engine For reliable information, see the operating manual of the
engine manufacturer.
Check oil level (see operator's manual of the engine
manufacturer).
Parking brake Check.
Flammable material Remove easily flammable debris buildup from the en-
gine and the device.
Steering Check the clearance in the MC mode.
Tires Check tires and, if necessary, the tire pressure.
Hydrostatic transmis- Check oil level.
sion

Yearly or every 50 h by the authorized service center

Component Action
Device Clean.
Carrying out basic inspection.
Checking the RC functions.
Checking the safety functions.
Tank,fuel valve, and Check parts for leaks and check for good condition.
fuel line
Ventilation grid Clean.
Engine cooling Clean.
Spark plug Check/replace.
Air filter Wait.
Blade and fastening Check for wear and damage. See chapter Checking the
components blade.
Change.
Blade brake clutch Does the blade brake clutch function safely and does
the blade come to a standstill within 5 seconds?
Release the drive lever Does the device stop when the lever is in neutral posi-
tion (parking brake)?
Does the lever in MC mode move to neutral position
when the brake pedal is activated?
Does the drive lever in the MC mode move to neutral
position when the driver leaves the seat?
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
When the engine When the en-
is not running gine is running
X
X
X X
X
X
X
X
X
X
X
X
X
X
X
X
Maintenance
39