Possible faults
Emergency stop dur-
Selection lever operating mode
ing changing of the
is not completely flipped over.
operating mode (MC
Remote Control Transmitter in
to RC)
Remote Control Transmitter
holder.
Seat contact switch activated.
Device does not drive
RC mode:
straight forward
Trimming of the steering is not
adjusted.
50
Flip the selection lever of the operating
mode all the way.
Remove the Remote Control Transmitter
from the Remote Control Transmitter
holder.
Clear the seat.
Adjust trimming with rotary knob trim-
ming steering on the Remote Control
Transmitter (if required, authorized ser-
vice center).