Connections As Well As Display And Control Elements - insys icom MRX Installation And User Manual

MRX

7.3.2 Connections as well as display and control elements

LTE/4G 1 (Primary) cellular antenna 1 (SMA socket)
LTE/4G 2 (Secondary) cellular antenna 2 for diversity/MIMO (SMA
Figure 17: MRcard PL – connections as well as display and control elements at the front

The primary antenna connection 1 is the main antenna connection and
must be used if only one cellular antenna is used (see page 37). The
screen of the antenna system must be connected to the protective
conductor when using an outside mounted antenna.
LED Colour
green
Power
orange
WAN green
green
Signal
orange
orange
Info
red
Table 13: MRcard PL – meaning of the display elements
socket)
Function off
Supply
WAN
inactive
chain
no signal
Signal or logged
out
Profile
Failure
blinking
1x during soft reset
3x during reset to
default settings
establishing
logged in (field
strength see Table
14)
PDP context estab-
lished
active saved
≠
Reset
Technical Information
on
via V+
1
via V+
2
established
Boot process not
completed
35