insys icom MRX Installation And User Manual page 14

Safety
2.9 General Safety Instructions
14
Caution!
Electrostatic discharges may damage the product!
Damage of the product.
Observe the general safety precautions when handling
electrostatic-discharge-sensitive parts.
Caution!
Incomplete voltage isolation!
Damage of the product.
To isolate the voltage from the device, disconnect any
supply circuit with its respective isolation device if a
redundant power supply is used.
Caution!
Overvoltage in power supply!
Fire hazard and damage of the product.
The product must be secured with a suitable fuse against
currents exceeding 6.3 A. It must be ensured that the fuse
will only be replaced by a fuse with the same rating in case
it needs to be replaced.
Caution!
Moisture and liquids from the environment may seep into
the interior of the product!
Fire hazard and damage of the product.
The product must not be used in wet or damp
environments, or in the direct vicinity of water. Install the
product at a dry location, protected from water spray.
Disconnect the power supply before you perform any work
on a device which may have been in contact with
moisture.
MRX