Installing The 2487 Detector; Introduction; Major Steps In Installing The 2487 Detector - Waters 2487 Dual A Operator's Manual

2

Installing the 2487 Detector

2.1 Introduction

® 2487 Dual λ Absorbance Detector requires connections to electrical power
The Waters
and to sample and waste lines to operate in any standard laboratory environment. This
chapter describes how to install the 2487 Detector and connect it to the electrical supplies
and to other equipment in an HPLC system.
Figure 2-1 shows the major steps in installing the 2487 Detector.
Figure 2-1 Major Steps in Installing the 2487 Detector
Start installation
procedure
Select appropriate
site
Unpack and
inspect
Install 2487
Detector
Make fluidic
connections
Make power
connections
Make signal
connections
Make connections
to other devices
Installation
complete
2
Introduction 39