Making Electrical Power Connections - Waters 2487 Dual A Operator's Manual

2.5 Making Electrical Power Connections

To connect the 2487 Detector to the ac power supply:
1. Plug the receptacle end of the power cord into the ac input connector on the rear
panel of the detector
2. Plug the other end of the power cord into a properly grounded ac power source.
2487 Detector Rear Panel
The 2487 Detector connects to other Waters components through rear panel electrical
connections (see
Inputs and
Outputs (see
Figure 2-7
)
Aux. 1
Aux. 2
Figure 2-5 2487 Detector Rear Panel Electrical Connections
(Figure 2-5).
Figure 2-5).
A B
Fuse Holder
TP01499
Fan Vent
IEEE-488
Interface
Connection
Power Input
Making Electrical Power Connections
2
47