Wall Mounting Instructions; Method - Hisense HMC8C86TOA User Manual

Method

1. Before installing the wall-mounted
bracket, place the equipment on a firm
and clean benchtop covered with a
piece of protective cloth. Because the
equipment is heavy, ensure that the
benchtop is firm and secure.
2. Remove the
wall-mounted holes on the rear
housing.
3. Install the
wall-mounted
wall-mounted holes in sequence to
avoid damage to the equipment.
4. Before mounting the equipment,
ensure that the wall-mounted bracket
is firm.
Note: If the screw driving depth cannot be determined, you can proceed with wall mounting under the
prerequisite that no damage is caused to the equipment. After mounting is completed, contact
professional mounting personnel or technical support personnel. Hisense shall not be liable for any
loss of the equipment due to incorrect installation or misoperations. The screw driving depth for the
wall-mounted holes on the rear metal housing ranges from 14.5 mm to 15 mm. A screw that exceeds
the specified length will cause irrecoverable damage to the equipment.

Wall Mounting Instructions

screws from the
hanger wheel,
bracket, and
Wall-mounted hanger wheel
Rear metal housing
Base level for
determining the
screw driving
depth
VESA wall mounting standard (mm) 1000 x 400
Wall-mounted screw diameter (mm) M8
27
Wall-mounted bracket
Wall-mounted screw