Hisense HMC8C86TOA User Manual page 11

Positions and Names of the LCD Monitor Control Parts
1. The appearance of the actual product shall prevail.
2. Do not power on and then off the LCD monitor within a short time because it takes time to disconnect the power
supply and complete system processing. Failure to comply may cause the LCD monitor to work abnormally.
3. When the OPS module is installed, in the OPS computer channel, the external USB device communicates with the
OPS computer. In other channels and on the home screen, the external USB device communicates with the LCD
monitor. When files are copied between the external disk/USB flash drive and the OPS computer/LCD monitor, do
not switch the signal source. Failure to comply will interrupt the communication between the external device and the
OPS computer/LCD monitor.
4. The LCD monitor supports an OPS power of 65 W at most. Do not use an OPS module with a power above 65 W.
9