Positions And Names Of The Lcd Monitor Control Parts - Hisense HMC8C86TOA User Manual

Positions and Names of the LCD Monitor Control Parts

OPS indicator
Standby indicator
Remote control
receive window
Name/Operation Function
Power button I/O It is used to power on and off the LCD monitor.
LCD monitor
indicator
OPS indicator
Remote control
receive window
USB port
Home button
Note:
It is green when the LCD monitor is in the power-on state and orange when it is in
the standby state.
It is blue during OPS operation.
It receives indication signals from the remote control.
USB: The USB 2.0 port can be used as the media playback port of the LCD
monitor or as the USB port of the built-in OPS module.
The USB 3.0 port can be used as the media playback port of the LCD monitor or
as the USB port of the built-in OPS module.
In normal mode, press this button to go to the soft button menu and to enable the
LCD monitor locking and unlocking functions. In the power-on state, press and
hold this button to enter the standby state. In the standby state, press this button to
wake up the LCD monitor.
Press this button twice (at an interval less than 1 second) to lock or unlock the
LCD monitor.
Home button
The bottom side
of the marked
part is the stylus
attachment area.
8