Installation Notes; Mounting On A Wall - Hisense 75B4E30T User Manual

1.3.

Installation Notes

• Only use the power cable provided with this product. If an extension cord is
required, please consult your service agent.
• The product should be installed on a flat surface, or the product may tip over.
Leave a space between the rear of the product and the wall for proper ventilation.
Do not install the product in a kitchen, bathroom or a place exposed to moisture,
failure to do so may shorten the life of the internal parts.
• Do not install the product where it is 5000m or higher in altitude. Failure to do so
may result in malfunctions.
1.4.

Mounting on a Wall

To mount this display onto a wall, you will have to obtain a standard wall-mounting kit
(commercially available). We recommend using a mounting interface that complies
with TUV-GS and/or UL1678 standard in North America.
VESA Grid
Please rotate 90 degrees counterclockwise if need portrait use and set screen
orientation as 90°(press MENU,select Common Setting and then select Desktop to
set screen orientation),and you can stick the spare logo to the front bottom.
（Please use the vertical hanging function under the guidance of professionals.）
Remote Sensor
NOTE:The remote sensor should be on the
upper right side when facing the display。
Unpacking and Installation
Table
90°
2
Protective Sheet