Equipment Connection Through The Ops Port - Hisense HMC8C86TOA User Manual

Connection
USB port External equipment

Equipment Connection Through the OPS Port

Instructions
OPS is a port specification developed by Intel and applicable to products with an embedded computer
module. The LCD monitor provides an OPS port, which can be connected to OPS-enabled equipment,
also called an OPS module computer, or OPS computer for short. You can contact Hisense to purchase
an OPS computer as needed. The OPS port of the LCD monitor can be supplied with power 19±0.5 V
and 4 A at most.
The following figure shows the structure and dimensions of the OPS computer.
Note:
After the OPS computer is installed, it is used as the touch host of the equipment's touch screen by
default. When the lateral USB Touch port is connected to an external computer, the external computer
is used as the touch host. In this case, switch the signal source to the display channel of the external
computer to enable the touch function. If you want to use the OPS computer as the touch host,
14