General - Hisense HMC8C86TOA User Manual

Color Grade: Adjust screen vividness. The value range is 0 to 100.
ZOOM: Select a proper zoom mode based on different signal sources. The LCD monitor supports
setting of different display modes, including Dot to Dot, Full Screen, and Scale Screen.
 Full Screen: The LCD monitor displays input image signals in full screen.
 Scale Screen: The LCD monitor displays full signals based on the actual
proportion. When screen utilization reaches the maximum value, the
upper/lower parts or the left/right sides of the screen may not display images.
 Dot to Dot: The LCD monitor displays images to their actual sizes.
Note: The ZOOM options vary depending on different signals. The Dot to Dot
mode is not supported for low-resolution signals.
Geometry Adjust:
Note:
(1) Geometry Adjust is set to full-signal by default (which cannot be adjusted) when the input signal
is OPS, DP, DVI, HDMI, or USB.
(2) The Geometry Adjust menu is unavailable when ZOOM is set to Dot to Dot or Scale Screen.
(3) The Geometry Adjust menu is unavailable when no signal is input.
(4) The Phase, Clock, and Auto adjustment items are available only in VGA signal input.
 Clock: Adjust the row width of the PC's input signals.
 Phase: Adjust the phase of the PC's input signals.
 Auto adjustment: Automatically adjust the position and size of an image.
3D NR: Select a level of 3D noise reduction. This feature optimizes image signals in time and space to
reduce external noise interference and restore the original signals. The options include OFF, High,
Middle, and Low.
Note: The 3D NR menu is inaccessible when the LCD monitor receives no signals.

General

Basic Operations
20