2
Remote Control
Standby
Enter /exit standby
Remote Lock
Lock/Unlock
Source
Select Source
Move focus up/down
Move focus left/right
Back to previous menu
Volume up (+)
Volume down (-)
Battery replacement method
1. Disconnect the battery cover from the remote control at the battery cover buckle and open the battery cover.
2. Insert two AAA 1.5V alkaline batteries. Note that the positive (+) and negative (-) terminals of the batteries
must match the positive (+) and negative (-) terminals in the battery case.
3. Close the battery cover from top to bottom until it is fully aligned with the remote control.
Back
Mute
Activate/exit mute state
Setting
Open the Settings menu
Confirm operation(OK)
Menu
Call out function menu
Home
Enter home page
2
LED All-In-One User Manual