Positions And Names Of The Lcd Monitor Control Parts - Hisense HMC8C65TOA User Manual

Positions and Names of the LCD Monitor Control Parts

Front view
Name/Operation Function
Power button
It is used to power on and off the LCD monitor.
I/O
It is green when the LCD monitor is in the power-on state and orange when it is in
LCD monitor
indicator the standby state.
OPS indicator It is blue during OPS operation.
Remote control
It receives indication signals from the remote control.
receive window
USB: The USB 2.0 port can be used as the media playback port of the LCD
monitor or as the USB port of the built-in OPS module.
USB port
The USB 3.0 port provides a faster transmission rate than the USB 2.0 port but it
can only be used by the built-in OPS module.
In normal mode, press this button to go to the soft button menu and to enable the
LCD monitor locking and unlocking functions. In the power-on state, press and
hold this button to enter the standby state. In the standby state, press this button to
Home button
wake up the LCD monitor.
Press this button twice (at an interval less than 1 second) to lock or unlock the
LCD monitor.
Note:
1. The appearance of the actual product shall prevail.
2. Do not power on and then off the LCD monitor within a short time because it takes time to
disconnect the power supply and complete system processing. Failure to comply may cause the
Home
Power button
button
I/O
8
LCD monitor indicator, OPS indicator,
and remote control receive window