Mounting The Switch In A Two-Post Rack - Aruba 6300F Series Installation And Getting Started Manual

1. Attach the four self-adhesive pads to the bottom corners of the switch.
2. Position the switch with the top panel up on the selected horizontal surface.
Ensure that the power cord and network cables at switch mounting location will not create a
tripping hazard.
Avoid blocking any ventilation openings on the sides, rear, or front of the switch.

Mounting the switch in a two-post rack

Before you begin, prepare your network data cables (not included) for connecting the switch to the
network.
To mount the switch in a two-post rack:
1. Attach the rack mount brackets to the switch by using a #1 Phillips (cross-head) screwdriver and the
supplied eight 8-mm M4 screws.
Aruba 6300F/M Switch Series Installation and Getting Started Guide | (xxxx Switch Series)
29