Connect Network Cables - Aruba 6300F Series Installation And Getting Started Manual

The transceivers operate only at full duplex. Half duplex operation is not supported.
n
Ensure that the network cable is NOT connected when you install or remove a transceiver.
n
24 SFP+ switches can support up to 48 transceivers.
n
(Optional) Insert up to four SFP transceivers in the fixed transceiver slots on the switch front panel.

Connect network cables

Connect network cables from network devices or your patch panels to the fixed RJ-45 ports and to any
installed transceivers.
Connect network cables to the RJ-45 data ports and to any optional transceivers installed on the switch
front panel.
Aruba 6300F/M Switch Series Installation and Getting Started Guide | (xxxx Switch Series)
31