Aruba 6300F Series Installation And Getting Started Manual page 43

Switch LEDs
Global Status
Indicator LED
OOBM Status
Indicator LED
* Press the Mode Select button to switch between User(default), PoE, Spd, or Stk Mode.
Table 12: Rear Panel LED Behavior
Switch LEDs
Fan health LED
UID LED
Aruba 6300F/M Switch Series Installation and Getting Started Guide | (xxxx Switch Series)
Function
Overall status of the product
Status of OOBM Link connectivity
Function
Status of fan
User-configurable LED
State
located LED : OFF
On/Flash Blue (for User defined the
30 min) locator LED:
On/Flash
Flash - Green Self-test in progress
during UBOOT and
SVOS
On - Green Successfully booted
AOS-CX
Flash - Amber Recoverable faults
(e.g. fans, PSU fault)
On - Amber Critical faults (e.g.
exceed
temperature limit)
Off OOBM port is not
connected, no link
established
Half Bright - Green OOBM port is
enabled and
established link with
partner
On - Green Experiencing high
bandwidth
utilization
Activity Flicker - % of the time that
Green the LED light up is
roughly
proportional to the
% of full bandwidth
utilization of the
port
State/Mode Meaning
On - Green Normal
Slow flash - Amber Fan fault
Off User define the
locator LED : OFF
On/Flash (30 min) - User define the
blue locator LED:
On/Flash
Meaning
43