Aruba 6300F Series Installation And Getting Started Manual page 11

Switch LEDs
Spd LED Indicates Port LEDs are
showing speed information
Stk LED Indicates Port LEDs are
showing stacking mode
information
UID LED Locator LED
Global Status Overall status of the product
Indicator LED
OOBM Status Status of OOBM Link
Indicator LED connectivity
* Press the Mode Select button to switch between PoE, Spd, or Stk Mode.
Function
Off
On - Green
Not Implemented
Off
On - Green
On - Amber
Slow flash Amber
Off
On/Flash Blue (for
30 min)
Flash - Green
On - Green
Flash - Amber
On - Amber
Snoring (Dim -
Bright periodically)
Off
Half Bright - Green
On - Green
Activity Flicker -
Green
State
Speed mode not selected
Speed mode selected
No fault defined
Stacking mode not selected
Stacking mode selected
One of the switch is
experiencing stacking failure.
Port LEDs will be used to
indicate the number of the
stacking member.
A port has a stacking failure.
Stacking mode not selected
User configured the located
LED : OFF
User configured the locator
LED: On/Flash
Self-test in progress during
UBOOT and SVOS
Successfully booted AOS-CX
Recoverable faults (e.g. fans,
PSU fault)
Critical faults (e.g. exceed
temperature limit)
System is in hibernation
OOBM port is not connected, no
link established
OOBM port is enabled and
established link with partner
Experiencing high bandwidth
utilization
% of the time that the LED light
up is roughly proportional to
the % of full bandwidth
utilization of the port
Meaning
Introducing the switches | 11