Table of Contents
Advertisement
Chapter 3
Getting started with switch
configuration
Getting started with switch configuration
This chapter is a guide for using the console Switch Setup screen to quickly assign an IP address and subnet
mask to the switch. You can also set a Manager password and, optionally, configure other basic features.
For more information on using the switch console, see the Fundamentals Guide for your switch model.
Recommended minimal configuration
In the factory default configuration, the switch has no IP address and subnet mask, and no passwords. In
this state, it can be managed only through a direct console connection. To manage the switch through in-
band (networked) access, configure the switch with an IP address and subnet mask compatible with your
network. See the Fundamentals Guide for your switch for more information on the various methods that
can be used for initial configuration.
Also, configure a Manager password to control access privileges from the console and web browser
interface. Other parameters in the Switch Setup screen can be left at either their default settings or settings
you manually enter.
Many other features can be configured through the switch console interface to optimize performance, to
enhance your control of the network traffic, and to improve network security. Once an IP address has been
configured on the switch, these features can be accessed more conveniently through a remote Telnet
session, through the switch web browser interface, and from an SNMP network management station
running a network management program. For a list of switch features available with and without an IP
address, see the latest version of the Fundamentals Guide for your switch.
Setup for initial configuration
For initial configuration information, see the Fundamentals Guide for your switch.
36
Aruba 6300F/M Switch Series Installation and Getting Started Guide | (xxxx Switch Series)
Hide quick links:
Advertisement
Table of Contents
