Installing The Switch; Shipping The Switch In A Rack; Included Parts - Aruba 6000 Series Installation And Getting Started Manual

Installing the switch

The following sections shows how to install the switch. The switches come with an accessory kit that includes
the brackets for mounting the switch in a standard 19-inch Telco rack or in an equipment cabinet. Also
included are rubber feet that can be attached so the switch can be securely positioned on a horizontal
surface. The brackets are designed to allow mounting the switch in a variety of locations and orientations.
For other mounting options, contact your local Hewlett Packard Enterprise authorized network reseller or
Hewlett Packard Enterprise representative.

Shipping the switch in a rack

If the switch is to be shipped in a rack, it can be mounted and shipped in a Hewlett Packard Enterprise
Universal Rack.
All models except JL679A and R8N89A may be shipped in a rack.
This method uses the HPE X410 Universal Rack Mounting Kit (J9583A, J9583B).
n
To order the J9583A or J9583B rack mounting kit, contact your Aruba sales representative.
n

Included parts

The switches have the following components shipped with them:
Documentation kit
n
Accessory kit containing:
n
Model
JL675A /
R8N85A
JL676A /
R8N86A
JL677A /
R8N87A
Aruba 6000 & 6100 Switch Series Installation and Getting Started Guide |
Accessory Kit Part
Number
5300-1364
5300-1365
5300-1364
Installing the switch
Items
1. Cable tie (1)
2. Holder (2)
3. Rubber pad 12s12x4mm (4)
4. Screw kit (1)
1. Cable tie (1)
2. Holder (2)
3. Rubber pad 12s12x4mm (4)
4. Screw kit (1)
1. Cable tie (1)
2. Holder (2)
Chapter 4
13