Effects Mode - ETC Source Four LED 3 Series User Manual

Effects Mode

1. Press the Function button (
then press the Intensity encoder to select it.
DMX
Max Int
Effect
Rate
Action
Press to play/pause
the sequence.
2. Press the green encoder to play the sequence.
More Options
Pause the sequence: Press the green encoder again. The green encoder toggles between
•
play and pause. When you press the green encoder to play the effect again, the fixture
resumes the effect from where you paused it.
Stop the sequence: Press the red encoder. When you press the green encoder to play the
•
effect again, the fixture plays the effect from the beginning.
Modify the sequence: Turn the encoders to change the corresponding values. To modify
•
the sequence further, press the blue encoder (for the Settings icon
settings for the sequence.
Push the sequence to connected fixtures: Press the Menu button (
•
Intensity encoder to navigate through the menu: Local Settings > Push Effects. When the
screen prompts you to confirm, press the green encoder (for the OK icon
Use Fixture in Stand-alone Mode
), use the Intensity encoder to navigate to Effects Mode, and
Turn an encoder to modify the
value in the matching field.
Effects
100%
Sequence
100
Forward
Press to Press to
stop the modify the
sequence. sequence.
Settings
DMX
Step 1
Fade 3s
Dwell 5s
Preset 1
Turn to modify
the value in the
matching field.
) to modify the
), and then use the
Press to return
to the Effects
screen.
) to continue.
19